PURE AND ULTRAPURE WATER SYSTEM – STAKPURE

PURE AND ULTRAPURE WATER SYSTEM – STAKPURE

Model: Omnia Tap 6-12/UV/UV-UF

Manufacturer: Stakpure – Germany

Origin: Germany

* Features:

• Reliable supply according to ASTM Type I + II standards
• Tap water kit for direct connection to drinking water
• Standard supplied OptiFill dispenser:
  • Allows one-handed operation
  • Detachable and ergonomically shaped
  • Rotatable with adjustable height
• Simple and cost-effective filter replacement
• Clear monitoring of controls via a graphic display
• Comes with a leak sensor

* Standard System Components

1. Compact housing with easily accessible operating and service hood that enables simple replacement of spent material in a few seconds
2. Wide-range power supply unit with automatic adjustment to 48 V that can be internationally used.
3. Tap water pretreatment unit with hardness stabilizer and reverse osmosis module for direct connection to a drinking water supply
4. Purified water container with 10 l volume and conical bottom run-out, together with a pressure outlet for connection to attached downstream equipment
5. Recirculation module for complete tank recirculation as protection against bacterial growth during downtimes that guarantees no loss of quality of the purified water
6. Two quiet running, long life pressure & recirculation pumps (< 40dB) for complete recirculation through all parts that contact medium right up to the dispenser tip.
7. Ultrapure purification set for removal of remaining traces of inorganic substances and ions
8. Quality rinse valve for the complete disinfection of all parts that contact media and for quality rinsing in interval mode
9. Multi-language microprocessor for the control and monitoring of all operation and performance parameters
10. OptiFill dispenser with adapted microfiltration that ensures sterile ultrapure water dispensing directly at the point of use.
11. UV-unit with 185/254 nm wavelength for highest microbial cleanliness and TOC-reduction (option)
12. Integrated ultrafiltration unit for the retention of endotoxins, proteins, DNases and RNases (option)

* Microprocessor control

1. Multi-lingual microprocessor control with graphics display and colour change from green to red when a fault message is given
2. Individual setting possibilities for conductivity indication (MΩ x cm or µS/cm) and language (German/English)
3. Multi-level conductivity and temperature monitoring for permeate and purified water, temperature compensation with continuously adjustable limiting value setting
4. Automatic matching to an integrated reference resistance prior to each measurement for USP conformity and high precision as well as possibility of temperature compensation switch-off.
5. Leak monitoring with display of faults and automatic safety feedwater cut-off.
6. GLP conform data acquisition via an RS-232 interface with adjustable sending interval, date, real time clock and serial number

* Specification:

• Drinking water according to DIN 2000
• Feedwater temperature: +2°C to 35°
• Feedwater pressure: 1 to 6 bar
• Manganese and iron content: < 0.05 mg/l
• Free chlorine content: < 1 mg/l
• Silt density index (SDI): max. 3

* Feed water requirements:

• Drinking water according to DIN 2000
• Feedwater temperature: +2°C to 35°
• Feedwater pressure: 1 to 6 bar
• Manganese and iron content: < 0.05 mg/l
• Free chlorine content: < 1 mg/l
• Silt density index (SDI): max. 3

* Output Water Specifications