AATCC 195 MOISTURE MANAGEMENT TESTER- DARONG

Origin: China

Category:

This Textiles Liquid Water Transfer Performance Tester is an advanced and specialized instrument designed to analyze and optimize fabric moisture control, focusing on quick drying capabilities. This tester operates by mimicking the real-world moisture conditions on sample fabric. A controlled liquid droplet is put in the targeted fabric, and the highly sensitive sensors sense the moisture content, absorbance and evaporation. The key specifications of the system, such as wetting time, moisture spreading speed, absorption rate and evaporation timing, are measured to calculate the fabric´s moisture management capability.

MODEL: DR290MC

This Tester Tests and evaluates liquid water dynamic transfer performance for textile moisture absorption and quick-drying properties.

STANDARDSSTANDARDS

  • GB/T21655.2
  • AATCC 195

FEATURES

  • Effortless cleaning and maintenance: The given tool has a high-efficiency cleaning design that completely gets rid of all the residual liquid before and after each test, giving precise and accurate measurements in each interval.
  • Smart evaluation: The evaluation software provides a user-friendly platform for users to analyze and examine test results effortlessly. It ensures easy data processing and visualization making it much easier to evaluate the moisture content of the fabric.
  • Water injection system: This moisture-wicking performance tester has a convenient water injection design that empowers experimenters to add salt water easily and replace that liquid before and after each test.
  • Data processing with CPU and AD: The moisture control analyzer has a powerful 32-bit CPU and 24-bit AD (Analogue-to-Digital). This enhances computational efficiency and captures the high-resolution data, respectively.
  • Versatile standard switching: The pressure counterweight, probe specifications, and other options allow operators to easily switch between old and new testing standards.

Related products

PH 80 BENCH TOP METER - BOROSIL

General Lab Equipment

PH 80 BENCH TOP METER – BOROSIL

The Benchtop pH 80 Meter combines advanced measurement accuracy with a sleek, intuitive design for dependable lab performance. Equipped to measure pH, mV, and temperature with high precision, it’s ideal for routine analysis in research, environmental, and industrial laboratories. Its large display, smart calibration, and user-friendly interface make everyday pH analysis simpler, faster, and more reliable.

AUTOMATIC DOSING AND DILUTION- SCHMIDT HAENSCH

General Lab Equipment

AUTOMATIC DOSING AND DILUTION- SCHMIDT HAENSCH

The SCHMIDT + HAENSCH AutoDosage system is of tremendous help in the workflow of a laboratory. The preparation of samples and dilutions in the laboratory will become perfectly reproducible and accurate, resulting in highest standard laboratory practice and reliable results.

COLORFLEX L2 SPECTROPHOTOMETER- HUNTERLAB

Spectrophotometers

COLORFLEX L2 SPECTROPHOTOMETER- HUNTERLAB

ColorFlex L2 Spectrophotometer Designed to streamline and expedite your quality control processes, ColorFlex L2 Spectrophotometer gives you unsurpassed confidence and trust in your outcomes with minimal space required while offering enhanced durability and reliability. ColorFlex L2 Spectrophotometer can also measures everything from opaque solids, liquids, powders, granules and pellets to translucent solids and liquids.

AATCC 183 ULTRAVIOLET TRANSMITTANCE TESTER- DARONG

General Lab Equipment

AATCC 183 ULTRAVIOLET TRANSMITTANCE TESTER- DARONG

This instrument measures how effectively a fabric can block harmful ultraviolet (UV) radiations of the sun. This test is often used for fabrics where UV protection is necessary for human health. This is usually measured by textiles’ Ultraviolet Protection Coefficient/Factor (UPF). Sports clothing, Outdoor gear, and Umbrellas need UV testing because of their direct exposure to sunlight, which can cause color fade, skin damage, and other health issues. This tester measures both UVA and UVB-type rays. A fabric with a higher UPF value is considered good for protection.

ASTM D4970/ISO-12945 -2 MARTINDALE PILLING & ABRASION TESTER- DARONG

General Lab Equipment

ASTM D4970/ISO-12945 -2 MARTINDALE PILLING & ABRASION TESTER- DARONG

Abrasion and Pilling are the most common fabric problems faced by end users. They are caused by pill or beads forming and degrading. These problems are mostly seen in used garments. Before manufacturing garments, fabrics are tested for their change in appearance and performance. This helps the manufacturer meet the required resistance for garments. The YG(B) 401T Martindale Abrasion Tester measures fabric wear and tear and appearance change. Separate methods and different machine settings are used for pilling and abrasion. Fabric is evaluated by change of appearance and difference in weight.

STEAM STERRILIZER VS-4045ST SERIES - VISION SCIENTIFIC

Autoclave Sterilizer

STEAM STERRILIZER VS-4045ST SERIES – VISION SCIENTIFIC

Steam Sterilizer VS-4045ST Series is durably designed and suitable for general laboratory use. The steam sterilizer series feature a fully automated process from heating to exhausting and draining. The device also includes multiple safety features, a precision electronic timer, and offers various capacity options.

INCUBATOR, AIR-JACKET (STANDARD, IB4-AS) - JEIOTECH

General Lab Equipment

INCUBATOR, AIR-JACKET (STANDARD, IB4-AS) – JEIOTECH

Incubator, Air-jacket (Standard, IB4-AS) An air-jacket type of incubator, standard type with intuitive controller, reliable control performance, convenient experiment and data checking. Model Name : IB4-03AS, 05AS, 10AS, 15AS

AATCC 8/AATCC 165 COLOR FASTNESS TESTER TO RUBBING- DARONG

General Lab Equipment

AATCC 8/AATCC 165 COLOR FASTNESS TESTER TO RUBBING- DARONG

Color Fastness to Rubbing test determines the rubbing off of color from a fabric when rubbed against a specific test cloth. It is also known as the “crocking test.” It can be done either in wet or dry form. The crock meter works on the simple principle of rubbing. A sample is mounted, and a white test cloth is installed on the friction head. After the rubbing process, the white cloth is evaluated against a gray scale for any color transfer. This test is used widely in industries where dyestuff is used. Textiles, leather, and chemical industries produce dyed apparel, which requires testing. This test is important as it reflects the material’s color behavior if it bleeds or stains upon friction. Items like clothing and upholstery should be tested before manufacturing as they face frequent rubbing and friction.

Sản phẩm đã xem

Không có sản phẩm xem gần đây

error: Content is protected !!