Description:
The blending arm has got a fork with split type openings at each end. When the bin is inserted into the arm and the two forks enters the lugs respectively, after complete insertion the end of the fork opens like a flower thereby completely locking the bin from getting out the arm during blending operation.
Feature:
The opening of the split end of the arm happens through a hydraulic cylinder (50mm stoke). The split end is connected by a tensile spring.
To ensure the spit arm does not collapse during blending there is a hydraulic pressure switch available which stops the main motor in case the pressure drops against the set pressure.
A pneumatic also as an additional safety limit switch in provided for the completion of the stroke. In case the 50mm stroke is incomplete, the main drive motor would not start.
In additional to all the advantages of a conventional bin blender, there is something more to add:
- Hydraulic Locking of the bin with feedback to the PLC ensuring that there is no manual intervention whatsoever.
- The same cavity arrangement is used for the blending cycle as well as the lifting of the bins on top of the compression machines.
- Very easy and hassle free arrangement ensuring compactness of the entire machine.
- Ideally suited from 500 Ltrs to 1500 Ltrs
