Model: HO-TH-05
FEATURES:
- Chuck diameters : 14mm, 22 mm, 36 mm (Outer diameter of the O ring)
- Transparent Safety Lid over the Working Chamber
- Non-volatile Program Memory
- User friendly design
- Back Panel Power On / Off Switch
- Inlet and outlet for Inert Gas Purging, 6mm tubing
| User Interface | : | 20 x 4 Line Alpha-numeric LCD and 16 button keyboard |
| Actuator | : | Brushless DC servo motor |
| Program Memory | : | 9 programs with 9 steps for each program |
| Speed Profile | : | Speed, Duration and acceleration |
| Spin Speed | : | 60 – 9999 RPM |
| Speed Resolution | : | 1 RPM |
| Speed Accuracy | : | +/- 1 % |
| Acceleration / Deceleration | : | 10 – 2000 rpm / s (Ramp & dwell time can be indirectly set by entering acceleration) |
| Duration | : | 1 – 99 sec / min / hr for each step |
| Sample Chucks | : | 3 Nos. (25 mm, 32 mm & 45 mm) |
| Maximum Sample Diameter | : | 100 mm |
| Minimum Sample Diameter | : | 13 mm |
| Bowl Material | : | Polypropelene |
| Bowl Size | : | 8 inches |
| Transparent lid with sample dispensing port | ||
| Drainage hose | ||
| Safety interlock to prevent spinning when the bowl is open | ||
| Sample Holder | : | PTFE disk with silicon rubber O ring |
| Sample Mounting | : | Secured by vacuum holding |
| Vacuum Connector | : | 8 mm dia Snap-in hose connector |
| N2 Purge Connector | ||
| Vacuum pump On / Off and release Switch | ||
| Dimension (mm) | : | 400 (L) x 275 (W) x 350 (H) |
| AC Input | : | 230 V |
| Maximum power consumption | : | 260 W (with vacuum pump) |
VACUUM:
| Oil free | ||
| Max flow rate | : | 45 lpm |
| Max vacuum | : | 27 inches Hg |
| Mac Pressure | : | 60 psig |
| Power | : | 1/4 hp |
| Dimensions | : | 300 x 130 x 200 mm |
