AATCC 8/AATCC 165 COLOR FASTNESS TESTER TO RUBBING- DARONG

Origin: China

Category:

Color Fastness to Rubbing test determines the rubbing off of color from a fabric when rubbed against a specific test cloth. It is also known as the “crocking test.” It can be done either in wet or dry form. The crock meter works on the simple principle of rubbing. A sample is mounted, and a white test cloth is installed on the friction head. After the rubbing process, the white cloth is evaluated against a gray scale for any color transfer. This test is used widely in industries where dyestuff is used. Textiles, leather, and chemical industries produce dyed apparel, which requires testing. This test is important as it reflects the material’s color behavior if it bleeds or stains upon friction. Items like clothing and upholstery should be tested before manufacturing as they face frequent rubbing and friction.

MODEL: Y(B)571G

This tester measures the color fastness to dry and wet by rubbing and brushing cotton, chemical fiber, blended and other colored fabrics, and leather.

STANDARD

  • GB/T 14344

  • GB/T 3916

  • ISO 2062

  • ASTM D2256

  • DIN, BS

  • etc

FEATURES

  • Friction Head: Its friction head has a pressure of 9N with a stroke of 104 mm.

  • Speed: It has a crank rotation speed of 60 RPM.

  • Sleek and Modern Design: The colorfastness tester has a servo motor installed, which makes zero noise. It has a steel body frame and an alloy grinding table. This rust-proof design makes it durable and long-lasting.

  • Global Standard Support: This color fastness tester can test according to ISO, AATCC, BS, and GB/T standards.

  • Display: This machine has a color touch screen. Users can control and give commands through it.

  • Easy-To-Use: The crocking meter has a very easy interface. Users must enter the required revolutions, and a test will be initiated

Related products

EIGHT-BASKET CONSTANT TEMPERATURE OVEN- DARONG

General Lab Equipment

EIGHT-BASKET CONSTANT TEMPERATURE OVEN- DARONG

The Y(B) 802K-II Automatic Fast Eight-basket Constant Temperature Oven is a high-performance laboratory oven system designed to measure the moisture regain and heat treatment of textile samples. The oven operates by placing the sample in each basket, which ensures airflow around each sample, giving uniform and absolute drying and heating. Built-in Digital control panel allows users to preset the temperature and time. The precise heating system and temperature sensors continuously monitor the heating system to calibrate in real time. After completing the testing, samples are removed, and the oven stops automatically.

STEAM STERRILIZER VS-4045ST SERIES - VISION SCIENTIFIC

Autoclave Sterilizer

STEAM STERRILIZER VS-4045ST SERIES – VISION SCIENTIFIC

Steam Sterilizer VS-4045ST Series is durably designed and suitable for general laboratory use. The steam sterilizer series feature a fully automated process from heating to exhausting and draining. The device also includes multiple safety features, a precision electronic timer, and offers various capacity options.

AATCC 195 MOISTURE MANAGEMENT TESTER- DARONG

General Lab Equipment

AATCC 195 MOISTURE MANAGEMENT TESTER- DARONG

This Textiles Liquid Water Transfer Performance Tester is an advanced and specialized instrument designed to analyze and optimize fabric moisture control, focusing on quick drying capabilities. This tester operates by mimicking the real-world moisture conditions on sample fabric. A controlled liquid droplet is put in the targeted fabric, and the highly sensitive sensors sense the moisture content, absorbance and evaporation. The key specifications of the system, such as wetting time, moisture spreading speed, absorption rate and evaporation timing, are measured to calculate the fabric´s moisture management capability.

GLASSWARE DRYER GDS020 - BOROSIL

General Lab Equipment

GLASSWARE DRYER GDS020 – BOROSIL

Labquest Glass Dryers can be used as benchtop models or wall hanging in your laboratory washing area. It offers drying of laboratory articles in 10 to 15 minutes. Useful for Quick Drying Viz. GCMS Glasswares, Kjeldahl Digestion Tubes, Routine work involving Assorted Glassware, General Purpose Drying.

NEPTUNO – ULTRASONIC BATH - FILTRA

General Lab Equipment

NEPTUNO – ULTRASONIC BATH – FILTRA

Ultrasonic bath have low electrical energy consumption and save time when compared to brushing out or other traditional methods. The areas which are difficult to access become clean and without traces of dirt, while the object surface is not damaged, as can happen with other methods. The NEPTUNO ultrasonic bath are made from stainless steel (AISI 304). We have various models according to capacity: 3 L / 6 L / 10 L / 20 L / 30 L.

XENON ARC TEST CHAMBER (WATER-COOLED)- DARONG

General Lab Equipment

XENON ARC TEST CHAMBER (WATER-COOLED)- DARONG

DR 3000 Xenon Arc Test Chamber is versatile testing equipment used to test color materials’ climate effects, including sunlight, humidity, rain, etc. Sunlight contains UV radiation, which affects color intensity and hue, making them pale and dull. It also fades color if exposed for a long time. Moreover, humid weather also affects deep colors and changes them with the passage of time. DR 3000 replicates light energy, temperature, and humidity in a controlled environment to stimulate these natural conditions. It contains a light source with light and heat filters for an adjustable spectrum. It also includes sensors for monitoring temperature and humidity. This tester is used widely for testing materials in textile, paint, rubber, petrochemical, automobile, and relevant industries where products need evaluation against fading, aging, color fastness, permeability, hardening test, etc.

SPECTROPHOTOMETER SPECTRATREND HT - HUNTERLAB

Spectrophotometers

SPECTROPHOTOMETER SPECTRATREND HT – HUNTERLAB

SpectraTrend HT utilization can facilitate continuous monitoring of product Height to enhance Good Manufacturing Practices (GMPs) within their enterprise, reduce risk of color quality variation and associated costs through real-time process color monitoring and enhance consistency and predictability of their quality assurance approach.

AATCC 183 ULTRAVIOLET TRANSMITTANCE TESTER- DARONG

General Lab Equipment

AATCC 183 ULTRAVIOLET TRANSMITTANCE TESTER- DARONG

This instrument measures how effectively a fabric can block harmful ultraviolet (UV) radiations of the sun. This test is often used for fabrics where UV protection is necessary for human health. This is usually measured by textiles’ Ultraviolet Protection Coefficient/Factor (UPF). Sports clothing, Outdoor gear, and Umbrellas need UV testing because of their direct exposure to sunlight, which can cause color fade, skin damage, and other health issues. This tester measures both UVA and UVB-type rays. A fabric with a higher UPF value is considered good for protection.

Sản phẩm đã xem

Không có sản phẩm xem gần đây

error: Content is protected !!