SPIN COATING UNIT-HOLMARC

Origin: India

Brand:

Category: Thương hiệu:

The Holmarc Spin Coating Unit HO-TH-05 is a tabletop system designed for precise spin coating of small substrates in research labs. It features a high-speed DC servo motor for accurate speed and acceleration control, requiring minimal maintenance. A vacuum chuck with an oil-less pump secures the substrate during spinning. The device includes a user-friendly front panel with a keyboard and LCD for programming parameters like spin duration, speed, and acceleration. Its non-volatile memory ensures data retention during power failures. The model supports 9 pre-set, editable programs, each with 9 steps for flexible operation.

Model: HO-TH-05

FEATURES:

  • Chuck diameters : 14mm, 22 mm, 36 mm (Outer diameter of the O ring)
  • Transparent Safety Lid over the Working Chamber
  • Non-volatile Program Memory
  • User friendly design
  • Back Panel Power On / Off Switch
  • Inlet and outlet for Inert Gas Purging, 6mm tubing
    User Interface :     20 x 4 Line Alpha-numeric LCD and 16 button keyboard
    Actuator :     Brushless DC servo motor
    Program Memory :     9 programs with 9 steps for each program
    Speed Profile :     Speed, Duration and acceleration
    Spin Speed :     60 – 9999 RPM
    Speed Resolution :     1 RPM
    Speed Accuracy :     +/- 1 %
    Acceleration / Deceleration :     10 – 2000 rpm / s (Ramp & dwell time can be indirectly set by entering acceleration)
    Duration :     1 – 99 sec / min / hr for each step
    Sample Chucks :     3 Nos. (25 mm, 32 mm & 45 mm)
    Maximum Sample Diameter :     100 mm
    Minimum Sample Diameter :     13 mm
    Bowl Material :     Polypropelene
    Bowl Size :     8 inches
    Transparent lid with sample dispensing port
    Drainage hose
    Safety interlock to prevent spinning when the bowl is open
    Sample Holder :     PTFE disk with silicon rubber O ring
    Sample Mounting :     Secured by vacuum holding
    Vacuum Connector :     8 mm dia Snap-in hose connector
    N2 Purge Connector
    Vacuum pump On / Off and release Switch
    Dimension (mm) :     400 (L) x 275 (W) x 350 (H)
    AC Input :     230 V
    Maximum power consumption :     260 W (with vacuum pump)

VACUUM:

Oil free
    Max flow rate :     45 lpm
    Max vacuum :     27 inches Hg
    Mac Pressure :     60 psig
    Power :     1/4 hp
    Dimensions :     300 x 130 x 200 mm

Related products

Others

AGAR PREPARATION PCX- BIOTOOLSWISS

The ProfiClave PCX sets a new standard for automated sterile culture agar preparation. Connected to any BioTool dish filler it provides a reproducible filling and stacking system.

Others

AUTOMATIC DOSING AND DILUTION- SCHMIDT HAENSCH

The SCHMIDT + HAENSCH AutoDosage system is of tremendous help in the workflow of a laboratory. The preparation of samples and dilutions in the laboratory will become perfectly reproducible and accurate, resulting in highest standard laboratory practice and reliable results.

Others

PETRI DISH FILLING PS 200/400- BIOTOOLSWISS

The unique PetriSwiss PS200/400 is a fully automatic and precise Petri Dish filling system, "made in Switzerland", of the most recent generation. With PS200 unique removable racks there is no waiting time until the agar is solidified in order to un- and reload the carousel. 180 plates true walk-away system with reload at anytime. The PS400 is a batch system, offering 360 plates capacity, true walk-away system, while plates are filled under UV light.Its integrated peristaltic unique double-head 10-roller pump head guarantees low pulsation flowrate and gentle media trasport. Large diameter filling tube allows filling at lower temperature, which eventually has a direct effect solidification time. Due to its piston driven plate processing plates containing an aliquot can be processes and mixed by the wave-movement. Optional ink-jet printer integration is avaiable (various brands)

Others

AGAR PREPARATION PC10/20B- BIOTOOLSWISS

The agar preparation ProfiClaves PC10/20 are fully automated Agar/Media Sterilizers, capable of processing 9/16 liters in just 1 - 1.5 hours. An intuitive touchscreen interface provides access to 20 programs, offering single or double heating cycles, autoclave or water bath mode, and convenient time-delay functions. The system features a built-in pressure pump to prevent flash boiling, a powerful magnetic stirrer, a sterile filter for pressurization, and SD card data logging. Its tool-free design allows easy vessel access, while automatic pressure correction optimizes de-aeration. When combined with Biotool’s PetriSwiss dish filling systems, the PC10/20 offers a complete and efficient solution for media preparation.

Others

DIP COATING UNIT-HOLMARC

Holmarc’s Dip Coating Unit has been designed in such a manner which minimizes the operator’s effort. The variables like speed, duration, etc. are maintained accurately by computer control. Dip-coating process includes five stages: immersion, start-up, deposition, evaporation and drainage. The coating thickness depends on various parameters like viscosity of the coating solution, immersion time, withdrawal speed, evaporation rate etc.

Others

PETRI DISH FILLING PS 20- BIOTOOLSWISS

The unique petri dish filling PetriSwiss PS20 Mini is a fully automatic and very precise Petri Dishfilling system, “made in Switzerland”. Offering facility for applications including dish feeding, single dosing, stacking and dish discharging the Petriswiss Mini delivers precise automated operation to enhance the productivity of your laboratory. The system can load twenty 90mm dishes with agar and restack them back into the Petrirack™ stacker in only 2 minutes.

Others

PETRI DISH FILLING PS 900- BIOTOOLSWISS

The unique petri dish filling PetriSwiss PS900 is a fully automatic, linear and very precise Petri Dish filling system, “made in Switzerland”, for high through-put filling and true walk away. Preload of 400 dishes, reload at any time, filling under UV light in covered filling chamber, Agar is applied by the unique 10-roller double head peristaltic pump with low pulsation, Vibramix for equal distribution of Agar and stacking from 1-20 dishes or pushed on the optional push-out table, operated by a touch screen. The PS900 is a heavy duty worker in dish filling

Sản phẩm đã xem

SPIN COATING UNIT-HOLMARC

The Holmarc Spin Coating Unit HO-TH-05 is a tabletop system designed for precise spin coating of small substrates in research labs. It features a high-speed DC servo motor for accurate speed and acceleration control, requiring minimal maintenance. A vacuum chuck with an oil-less pump secures the substrate during spinning. The device includes a user-friendly front panel with a keyboard and LCD for programming parameters like spin duration, speed, and acceleration. Its non-volatile memory ensures data retention during power failures. The model supports 9 pre-set, editable programs, each with 9 steps for flexible operation.

error: Content is protected !!