TEMPERATURE & HUMIDITY CHAMBER BASIC TYPE (TH3-E) – JEIOTECH

Origin: Korea

Brand:

Category: Tag: Thương hiệu:

Temperature & Humidity Chamber Basic type (TH3-E)

A cost-beneficial solution for limited test conditions, but stable in climate control.

Model Name : TH3-E-200/400

FEATURES:

  • Convenient operation with 5.6 inch color touch display controller.
  • Minimize the occurrence of faults by simplifying water direct line and electric circuit.
  • Efficient water supply and recirculation system minimizes water refilling even for long-term high-humidity tests.
  • Easy observation of samples with tempered glass door with built in heating wire and LED lamp.
  • Easy to clean as it is easy to remove refrigerator condenser grill, making it convenient to maintain efficiency of refrigeration.
  • Control and data processing by connecting up to 32 devices to PC at same time via RS-485 port.
  • Monitor via mobile app anytime, anywhere with LC Connected. (mobile monitoring system) (when purchased LC GreenBox)

Outstanding Safety:

  • Electronic over temperature shutdown system. (advanced over temperature (A-OT) limiter)
  • Independent precision temperature sensor and controller for safer and more accurate over temperature shutdown.
  • General-type over power shutdown system. (B-OT, backup over temperature limiter)
  • A backup device for electronic system failure, mechanically preventing over temperature even when it occurs electronic errors.
  • Ensures that the surface temperature is kept below 60°C.
  • Low and empty water level alarm and automatic shut off.
  • Door open warning and automatic shut off.
  • Overcurrent and short circuit protection of device.
  • Fuse installed for each heater for safety.
  • Auto stop when operating current of compressor is overloaded.
  • Auto stop when compressor is overheating.
  • Auto shut off in case refrigerant pressure (high/low pressure) is abnormal.

SPECIFICATION:

Model

TH3-E-200

TH3-E-400

Interior dimensions

Chamber volume (L / cu ft)

201 / 7.1

398 / 14.1

Width (mm / inch)

500 / 19.7

600 / 23.6

Depth (mm / inch)

670 / 26.4

830 / 32.7

Height (mm / inch)

600 / 23.6

800 / 31.5

Quantity of shelves (standard/max.)

2 / 9

2 /10

Distance of between shelves (mm / inch) 40 / 1.6

40 / 1.6

Max. load per shelf (kg /lbs)

20 / 44.1

25 / 55.1

Permitted total load (kg / lbs)

50 / 110.2

60 / 132.3

Cable port (Ø, mm / inch)

50 / 2.0

65 / 2.6

Water tank capacity (L / cu ft)

20 / 0.7

20 / 0.7

Weight (kg / lbs)

200 / 440.9

270 / 595.2

Temperature data

Range without humidity (℃ / ℉)

0 to 90
/ 32 to 194

0 to 90
/ 32 to 194

Fluctuation (±℃ / ℉) (*)

0.5 / 0.9

0.5 / 0.9

Variation (±℃ / ℉) (*)

0.8 / 1.44

0.8 / 1.44

Heating time (0℃ to 90℃) (min)

80

80

Cooling time (90℃ to 0℃) (min)

90

90

Humidity data (Ref.: Temp./ Humid. control range graph)

Range (%RH)

35 to 85

35 to 85

Fluctuation (±%RH) (*)

1

1

Variation (±%RH) (*)

3

3

Electrical data & Ordering information
Electrical requirements (AC230V, 1ph, 60Hz)

15A

16A

Cat. No.

AAH841102K

AAH841112K

Electrical requirements (AC230V, 1ph, 50Hz)

15A

16A

Cat. No.

AAH841102K

AAH841112K

  • The above specifications are tested according to DIN 12880 and IEC 60068 standards.
  • Permissible environmental conditions are 18 – 30°C (recommended 20°C), 85% RH or less, under 2000m above sea level.
  • The DI water condition is pH 6.2 – 7.2 and the electrical conductivity is less than 20㎲/cm.

(*) The set value is set under the conditions of 40°C, 75% RH.

Model TH3-E-200 TH3-E-400
W (mm / inch) 655 / 25.8 755 / 29.7
D (mm / inch) 1495 / 58.9 1695 / 66.7
H (mm / inch) 1162 / 45.7 1322 / 52.0
A (mm / inch) 375 / 14.8 455 / 17.9
B (mm / inch) 985 / 38.8 1135 / 44.7

Sản phẩm đã xem

ColorFlex L2 Spectrophotometer Designed to streamline and expedite your quality control processes, ColorFlex L2 Spectrophotometer gives you unsurpassed confidence and trust in your outcomes with minimal space required while offering enhanced durability and reliability. ColorFlex L2 Spectrophotometer can also measures everything from opaque solids, liquids, powders, granules and pellets to translucent solids and liquids.

The SPS Dynamic Vapor Sorption (DVS) system is a device used to measure changes in sample mass under precisely controlled temperature (5°C–60°C) and humidity (0–98% RH) conditions. With a balance resolution of up to 0.1 µg, multi-sample capability (up to 23 samples), and advanced automated design, the SPS ensures accurate and reliable results, making it ideal for applications in pharmaceuticals, food, and material sciences.

Labquest Glass Dryers can be used as benchtop models or wall hanging in your laboratory washing area. It offers drying of laboratory articles in 10 to 15 minutes. Useful for Quick Drying Viz. GCMS Glasswares, Kjeldahl Digestion Tubes, Routine work involving Assorted Glassware, General Purpose Drying.

Moisture content can have a significant impact on powder properties such as flowability or compressibility. Measurement of mechanical properties at certain moisture contents therefore is essential in order to avoid problems during processing, storage and transport. The ProUmid Powder Conditioner enables moisture equilibration of particulate systems such as powders, granules or pellets at controlled relative humidity.

error: Content is protected !!