ISO 2062 CHEMICAL FIBER FILAMENT STRENGTH TESTER- DARONG

Origin: China

Category:

YG(B) 021HL is used to evaluate the breaking strength and elongation of synthetic fibers. These fibers can be monofilament, spandex, polyamide, polyester filament, composite or deformed filament. They can be tested in dry and wet states. YG (B) 021HL is suitable for testing the tensile physical performance properties of these fibers. This tensile filament tester works based on the CRE (Constant Rate of Extension) principle. In this test, one clamp is stationary and the other moves at a constant speed, causing the sample to elongate until it breaks. The maximum force is recorded as breaking strength. This test helps in fiber characterization, fiber selection and its behavior. This testing is also crucial in ensuring product safety, quality and reliability.

MODEL: YG(B)021HL

This tester is used to test the breaking strength and elongation at the break of synthetic fiber monofilaments, spandex, nylon, polyester filaments, twisted composite yarns, and textured yarns.

STANDARDS

  • GB/T 14344

  • GB/T 3916

  • ISO 2062

  • ASTM D2256

  • DIN, BS

  • v.v.

FEATURES

  • Accuracy: This filament tensile tester can test with an accuracy of less than 0.2% F.S. at its maximum load test range.

  • Test Parameters: It can save up to 6 groups of different parameters for time-efficient and repeated test results. Users can search for their test results from stored memory.

  • Data Output: This filament fiber tester has a microcomputer control, LCD display, and printing output.

  • Test Speed: Users can adjust the testing speed between 10 and 1000 mm/min. Pneumatic clamping is provided for firm gripping, and the clamping distance can also be adjusted between 50 and 500 mm.

  • Compliance: This tensile strength tester complies with different industry standards, including ISO, GB/T, ASTM, DIN etc., for reliable and comparable test results

Related products

SPECTROPHOTOMETER SPECTRATREND HT - HUNTERLAB

Spectrophotometers

SPECTROPHOTOMETER SPECTRATREND HT – HUNTERLAB

SpectraTrend HT utilization can facilitate continuous monitoring of product Height to enhance Good Manufacturing Practices (GMPs) within their enterprise, reduce risk of color quality variation and associated costs through real-time process color monitoring and enhance consistency and predictability of their quality assurance approach.

SHAKING INCUBATOR PURICELL_SHAKING X10 - CRYSTE

General Lab Equipment

SHAKING INCUBATOR PURICELL_SHAKING X10 – CRYSTE

PURICELL_SHAKING X10 is a large-capacity low-temperature shaking incubator suitable for shaking experiments and cultivation and capable of stably stirring large amounts of samples

XENON ARC TEST CHAMBER (WATER-COOLED)- DARONG

General Lab Equipment

XENON ARC TEST CHAMBER (WATER-COOLED)- DARONG

DR 3000 Xenon Arc Test Chamber is versatile testing equipment used to test color materials’ climate effects, including sunlight, humidity, rain, etc. Sunlight contains UV radiation, which affects color intensity and hue, making them pale and dull. It also fades color if exposed for a long time. Moreover, humid weather also affects deep colors and changes them with the passage of time. DR 3000 replicates light energy, temperature, and humidity in a controlled environment to stimulate these natural conditions. It contains a light source with light and heat filters for an adjustable spectrum. It also includes sensors for monitoring temperature and humidity. This tester is used widely for testing materials in textile, paint, rubber, petrochemical, automobile, and relevant industries where products need evaluation against fading, aging, color fastness, permeability, hardening test, etc.

PH 80 BENCH TOP METER - BOROSIL

General Lab Equipment

PH 80 BENCH TOP METER – BOROSIL

The Benchtop pH 80 Meter combines advanced measurement accuracy with a sleek, intuitive design for dependable lab performance. Equipped to measure pH, mV, and temperature with high precision, it’s ideal for routine analysis in research, environmental, and industrial laboratories. Its large display, smart calibration, and user-friendly interface make everyday pH analysis simpler, faster, and more reliable.

INCUBATOR, AIR-JACKET (STANDARD, IB4-AS) - JEIOTECH

General Lab Equipment

INCUBATOR, AIR-JACKET (STANDARD, IB4-AS) – JEIOTECH

Incubator, Air-jacket (Standard, IB4-AS) An air-jacket type of incubator, standard type with intuitive controller, reliable control performance, convenient experiment and data checking. Model Name : IB4-03AS, 05AS, 10AS, 15AS

QUANTA PRO/PROMAX SPECTROPHOTOMETER - BOROSIL

Spectrophotometers

QUANTA PRO/PROMAX SPECTROPHOTOMETER – BOROSIL

The Quanta Pro and Promax series of UV visible spectrophotometers are powered with high sensitivity, accuracy, and reproducibility Applications finds way as an invaluable tool for quantitative and qualitative analysis in environmental analysis, research laboratories, chemistry and educational institutions. Product Code : 100UVVAR/ 100UVFIX

AATCC 15/AATCC 107 PERSPIROMETER- DARONG

General Lab Equipment

AATCC 15/AATCC 107 PERSPIROMETER- DARONG

Color Fastness is the property of a material to resist the change in its own color or transfer its color to another material. It happens when a fabric is subjected to a harsh environment resulting in contact with liquids. i.e. rain, sweat, etc. Perspiration is the human sweat process that can be acidic or basic. When garments come in contact with sweat, it affects their color and bleeding behavior. This process is applied to dyed, printed, and colored fabrics. The YG(B) 631 color fastness apparatus is used to measure this color change. The fabric sample is sandwiched with multi-fabric, stacked between its plates, and left for several hours. After test time, fabric and multi-fabric is evaluated.

HEAT PROTECTION TESTER- DARONG

General Lab Equipment

HEAT PROTECTION TESTER- DARONG

The DR255C Heat Protection Tester is specially designed to evaluate the thermal insulation performance of fabrics used in flame-retardant protective clothing. It simulates real-world conditions of exposure to radiant and convective heat sources, ensuring accurate results in compliance with international standards such as GB, NFPA, ASTM, and ISO. This tester is a reliable solution for protective textiles, firefighting gear, and occupational safety.

Sản phẩm đã xem

Không có sản phẩm xem gần đây

error: Content is protected !!