AUTOMATIC TOTAL ORGANIC CARBON (TOC) ANALYZER – TOCADERO ONE – HORIBA

Origin: Japan

Brand:

Category: Tags: , Thương hiệu:
Tags: ,

As part of HORIBA’s advanced on-line water quality analyzer lineup, TOCADERO ONE has been developed to ensure accurate and reliable total organic carbon monitoring. It plays a vital role in improving wastewater management efficiency through real-time, continuous measurement. Designed to meet diverse analytical demands, the system features scalable hardware and intuitive software, ensuring stable operation even in harsh and variable conditions.

AUTOMATIC TOTAL ORGANIC CARBON ANALYZER (ON-LINE TOC ANALYZER) – TOCADERO ONE

KEY FEATURES:

1200°C combustion oxidation method:

  • No catalyst required
  • Capable of handling high-concentration samples ranging from 0 to 20000 mg/L C with its high oxidative decomposition power. (However, it may vary depending on the measurement environment and sample characteristics.)
  • Compatible with a wide range of applications.
  • Less prone to furnace blockage even with high concentration and high salinity samples.

Achieves high-speed processing:

  • Total Carbon (TC): Minimum 1 minute, Non-Purgeable Organic Carbon (NPOC): Minimum 3 minutes
    *May be affected by installation conditions, sample water conditions, and settings.

Continuous and stable measurements can be achieved:

  • Through monitoring device status with each sensor, we are approaching Condition Based Maintenance (CBM).
    *May be affected by installation conditions, sample water conditions, and settings.

Reduction of residue effects:

  • Incorporating functions to reduce residue effects and an automatic cleaning feature using pure water, allow the system to respond effectively during flow path switching or concentration fluctuations.
    *May be affected by installation conditions, sample water conditions, and settings.

SPECIFICATIONS:

ANALYTICAL PERFORMANCE

Measurement ranges 0-1ppm, 0–100ppm, 0–1.000ppm, 0–10.000ppm (optional: 0 –100.000ppm)
Limit of detection 0,1ppm
Cycle time TOC(NPOC) < 3min.
Cycle time TC/TOC 1min.
Repeatability ± 2% end-of-range
Total Dissolved Solids (TDS) up to 200g/l (20% NaCl)
Particles < 2.000 microns (optional: homogenizer and sample preparation)

PHYSICAL PROPERTIES

Weight < 55kg
Dimensions 800 H × 600 W × 320 D mm
Power AC 110 – 230V ±10V, 50/60 Hz, Approx. 600 VA
Carrier gas CO2-free instrument air

ENVIRONMENTAL CONDITIONS

Indoors 2 – 45°C
Relative humidity < 85% (no condensation)
Housing IP 54, IP 65 (optional: NEMA4X)
Ex p-Enclosure Zone 1/2, T3 and T4, ATEX & IECEx

COMMUNICATION

Display 7“ Touch Panel
Supported protocols OPC UA, Ethernet, Profinet, Modbus
Communication Bluetooth, WLAN, GSM, 5G
Relays 4 programmable – NAMUR standard
Languages German, English, Japanese, Chinese, Korean

Related products

FULLY COMPUTERIZED TABLET PRESS - FLUIDPACK

Table Press

FULLY COMPUTERIZED TABLET PRESS – FLUIDPACK

The fully computerized tablet press (ACT series) is a state-of-the-art single rotary tablet press machine designed for research and development (R&D) as well as small-scale production. Featuring advanced motorized systems, precision controls, and GMP-compliant design, this machine is ideal for producing high-quality single or bi-layer tablets.

EXTRACTION UNIT - UNOPEX E50

Extraction Systems

EXTRACTION UNIT – UNOPEX E50

The Unopex E-50 Extraction Unit is engineered by Unopex, a leader in advanced extraction and evaporation technologies. This unit is particularly designed for solid-liquid extraction and is equipped with integrated evaporators suitable for both research and development and small-scale industrial production.

ULTRA-MICROBALANCE - RADWAG

Analytical Balances

ULTRA-MICROBALANCE – RADWAG

The UYA 2.5Y Ultra-Microbalance is a high-precision weighing device designed to meet the most demanding requirements in mass measurement. With a readability of 0.1 µg and advanced automation systems to maximize stability, this product is ideal for applications in pharmaceuticals, laboratories, and scientific research.

MOISTURE ANALYZERS - RADWAG

Analytical Balances

MOISTURE ANALYZERS – RADWAG

Radwag offers a comprehensive range of moisture analyzers designed to measure moisture content accurately and efficiently in various materials. These instruments cater to industries such as pharmaceuticals, food production, and chemical processing, ensuring precise moisture determination for quality control and process optimization.

SUPERCRITICAL CO2 EXTRACTION SYSTEM - SFE PROCESS

Extraction Systems

SUPERCRITICAL CO2 EXTRACTION SYSTEM – SFE PROCESS

The SFE Lab 1+ is a cutting-edge supercritical CO₂ extraction system designed for laboratory-scale applications, offering precise control with a maximum pressure of 1000 bar and temperature up to 100°C. Its compact design, automated operation, and expandable capacity make it an ideal solution for efficient and versatile extraction processes in research and development.

COMBO REFRIGERATOR - NEWTRONIC

Stability Chamber & Walk-in

COMBO REFRIGERATOR – NEWTRONIC

The Combo Refrigerator is designed for applications requiring precise temperature control for both upper and lower temperature zones. With its robust construction and advanced technology, this equipment is ideal for a wide range of industrial and research applications.

DISSOLUTION SYSTEM DISTEK 2500 SELECT - DISTEK

Dissolution Tester

DISSOLUTION SYSTEM DISTEK 2500 SELECT – DISTEK

The Distek Model 2500 Select Bathless Dissolution System is the culmination of three generations of patented bathless technology with extremely short media heating times and dramatically smaller energy use. The system offers great flexibility and configurability. It can be configured as USP Apparatus 1, 2, 5, and 6 plus intrinsic dissolution. Patented wireless temperature sensors continuously monitor and display the in-vessel temperature for each vessel. Unparalleled control of the instrument plus automatic storage of component serial numbers and automatic qualification reminders make the Model 2500 Select robust and reliable enough for QC applications yet flexible enough for R&D use.

WALK-IN COLD ROOM - NEWTRONIC

Stability Chamber & Walk-in

WALK-IN COLD ROOM – NEWTRONIC

Walk-In Cooling Chambers are designed for precise temperature control in large-scale storage applications. They ensure uniform cooling and are ideal for industries such as pharmaceuticals, biotechnology, and food storage.

Sản phẩm đã xem

CAPSULE HARDNESS TESTER – BAREISS

Fully automatic and modular digital tester for strength and hardness testing of gelatin capsules, gel-based culture media and other flexible cellular plastics,

CAN LEAK TESTER (CLT) – OXIPACK

The Oxipack Can Leak Tester (CLT) is a versatile solution designed for testing various types of cans, including metal and composite carton cans, with or without paper labels. Utilizing the vacuum decay method for leak testing, the CLT's patented, FDA-approved flexible membrane is pre-formed to match the shape of the packaging. This design allows for creating a small measuring space around the packaging and a deep vacuum in the test chamber, ensuring the protection of seals and contents. The CLT's ability to test different package sizes and filling weights, thanks to interchangeable clock heads, makes it a quick and efficient tool for objective results. It can detect micro-leaks as well as larger leaks or open packs, making it ideal for quality control in can packaging. Meeting the ASTM F2338 standards, the CLT is a non-destructive, accurate, and easy-to-operate solution for ensuring the integrity of canned products.

POTENTIOMETRIC AUTO TITRATOR (TITRA SMART)- LABINDIA

Titra Smart is an automatic potentiometric titrator designed for precise quantitative chemical analysis. It supports two-point auto-calibration and standardization (zero offset) and displays pH and mV values with temperature compensation. The system is made with chemically inert Teflon and glass-tight burette material for sensitive analyses. It complies with 21 CFR Part 11 with audit trails, electronic signatures, and robust data management capabilities.

OXIPACK BOTTLE LEAK TESTER (BLT) – OXIPACK

The Oxipack Bottle Leak Tester (BLT) is a specialized solution designed for testing a diverse range of bottles, catering to different dimensions and shapes. Utilizing the vacuum decay method, the BLT ensures that every part of the bottle, from the top to the entire structure, is thoroughly tested for leaks without compromising the contents. The BLT's unique measuring head creates an optimal closure around the bottle, allowing for the detection of both significant and minute leaks. The pre-formed design of the tester matches the exact shape of the packaging, ensuring a protective embrace and meticulous accuracy. This non-destructive, user-friendly, and robustly designed tester is integral for maintaining the integrity of bottled products, proving indispensable in quality control processes.

STATIONARY LEAK TESTER R&D (SLT R&D) – OXIPACK

The Oxipack Stationary Leak Tester R&D uses vacuum decay (ASTM F2338) for non-destructive testing of flexible (MAP) packaging. It ensures accurate detection of leaks, features a user-friendly touchscreen, and can test multiple packs simultaneously with instant, objective results.

GLOVEBOX (KK-011AD) – KIYON

The KK-011AD glovebox is a specialized device designed to create a sealed working environment free from moisture and oxygen, ensuring the protection of sensitive samples or processes. This equipment is widely used in fields such as chemical research, pharmaceutical production, and the electronics industry.

SHAKING INCUBATOR PURICELL_SHAKING X10 – CRYSTE

PURICELL_SHAKING X10 is a large-capacity low-temperature shaking incubator suitable for shaking experiments and cultivation and capable of stably stirring large amounts of samples

GLOVEBOX (KK-011AS) – KIYON

The KIYON KK-011AS glovebox model is designed to provide a completely enclosed and tightly controlled working environment, with internal oxygen and moisture levels maintained below 1 PPM. This equipment is intended for single-user operation with two glove ports.

error: Content is protected !!